Did you know that properly using the thermostat can help you keep your home warm without spending too much money? Many people spend more money than they should on heating just because they don’t set their boiler to the right temperature. However, there’s a trick that most people have forgotten and that can lower your energy bill and extend the life of your heating system. So, let’s learn more about this thermostat trick.
Setting your boiler temperature
The boiler of your home heats water before sending it to radiators or your heating system. The temperature at which it heats the water is called the flow temperature. Most boilers come set at 176°F (around 80°C) from the factory, but this temperature is too high, causing the boiler to use more gas than needed, which increases your bills.
The forgotten trick
David Holmes, expert on energy saving, says that many people leave the flow temperature too high without even knowing it. The good news is that this can be adjusted between 131ºF and 140ºF (about 55ºC and 60ºC). This lower temperature allows the boiler to work in condensation mode, which is more efficient.
When the boiler is in condensation mode, it reuses part of the heat that would normally be lost through exhaust gases. This means it would waste less energy, it would use less gas, and your home is kept warm without spending more money.
The role of thermostat
Even though setting the heating is important, your thermostat is still a key part of the process to save some money on your energy bill. A properly set thermostat keeps your home’s temperature stable and avoids the boiler work more than it should. This guarantees comfort at your home and a more affordable bill to pay, who doesn’t like paying less?
Other advice to reduce heating bills
If you think you are paying too much for your heating bill, you can do a few things more to achieve a cheaper bill. Let’s have a look:
- Avoid high settings: Too-hot water wastes energy and stresses the boiler.
- Seal leaks and improve insulation: Heat loss forces the heating system to work harder. Check doors, windows, and walls to keep warmth inside.
- Know your costs: On average, running a gas boiler for 70 hours per month costs about $86, while an electric boiler for the same time costs about $136. Efficiency makes a big difference.
- Call a professional if unsure: Always hire a Certified Gas Engineer if you are unsure how to adjust your boiler safely.
Why this adjustment is important in the U.S.
Of course, this information is useful for homes in general, but in U.S. homes this is crucial because energy costs vary depending on the state. So, an efficient gas heating would help them save money during the entire winter.
Holmes explains that the combination of a bad setting of the boiler, low efficiency, and heat leaks are the main causes of high energy bills.
So…
By simply adjusting your boiler’s flow temperature and using your thermostat wisely, you can make a real difference in both your comfort and your wallet this winter. It’s one small change that pays off in big savings, less wasted energy, and a longer-lasting heating system. Don’t let high bills sneak up on you—take control, make this simple adjustment, and enjoy a warm, cozy home without the stress of overspending. Your future self (and your energy bill) will thank you.
So, would you have a go at all we told and see how beneficial it is for you? If you think this is a positive thermostat and boiler trick, you could share it with your friends and family because sharing is caring!